Home
Product Discontinued
This item was discontinued on 19th July, 2017
Recommended alternative:
Standard Halogen Par16 GU10 50 Watt
Check out our full range:
2 Pin Halogen Light Bulbs
Beam Angle
40 Degrees
Cap/Base
GZ10
Cap/Base Type
2 Pin
Colour Temp
2700 K
Dimming?
Dimmable
Length
55 mm
Light Bulb Type
Reflectors/Spotlights
Light Colour
Warm White (830)
Manufacturer
Leading Brand
Technology
Halogen
Type
Light Bulb
Voltage
220-240 Volt
Wattage
50 W
Model: GZ10/50
The 50 Watt Halogen Dichroic GZ10 Reflector/Spotlight featuring a 40 degree beam angle is an affordable lighting solution for a variety of domestic and commercial applications. This light bulb operates at 240 Volts, is a high intensity light source and offers a 3000 hour lamp life.
Light Bulb Type | Reflectors/Spotlights |
---|---|
Technology | Halogen |
Wattage | 50 W |
Manufacturer | Leading Brand |
Light Colour | Warm White (830) |
Dimming? | Dimmable |
Beam Angle | 40 Degrees |
Colour Temp | 2700 K |
Length | 55 mm |
Cap/Base Type | 2 Pin |
Type | Light Bulb |
Manufacturers Average Lamp Life | 3000 hrs |
Voltage | 220-240 Volt |
Cap/Base | GZ10 |
5055155422943 |
5018986675254 |
4041061058483 |
50PAR16WFLGZ10 C029 |
50PDR16F |
PAR 16 240 50 GZ10 |
For 50 Watt Halogen 240 Volt GZ10 (40 Degree Beam)
We make every effort in answering your questions.
Fri Apr 2015
The beam angle of a lighting source is the angle between the two opposing points at which the light output from the light source drops to below 50% intensity. A simplified way of thinking about the beam angle of a light source is that it is the angle ...
Fri Jul 2015
A halogen dichroic light bulb has a reflector that emits the light from the back of the lamp. Used in the wrong downlighter they could cause overheating. You can tell them apart from a ordinary lamp by shining a light at the back of one, if it's ...
Fri Jul 2015
The codes for "G Style Cap" light bulbs can seem confusing, the chart below should help to clearly show the differences in the four most popular types (GU4, GZ4, GU10 and GZ10). In order to work out the difference you need to break the code ...