Part Codesof alternative stock identifiers
Tridonic Switch Start Choke EC 18 B502Kfrom Tridonic (Model: 22148765)
- Magnetic chokes for fluorescent lamps
- Nominal life time 100,000 hours at tw = 130 °C
- Additional types on request
|Ballast Type||Switch Start|
|Lamp Type||2D (2 Pin)|
|Lamp Type||PLC (2 Pin)|
|Lamp Type||PLT (2 Pin)|
|Lamp Wattage||24 W|
|Lamp Wattage||18 W|
|Lamp Wattage||26 W|
|Lamp Wattage||23 W|
|Lamp Wattage||28 W|
|No. Of Lamps||Single (1x)|
|Tridonic Part Number||22148765|
Product Downloadsavailable for this item
Please complete the fields below. Required fields are marked with an asterisk (*).
An electronic transformer is used to reduce mains voltage to a suitable voltage for halogen light bulbs (Not to be confused with LED Drivers). When selecting a transformer it is important to ensure the max wattage is not exceeded by the total wattage consumed by the light bulbs.
Please Note: It is not recommended to "max" out transformers.
IE 5no. lamps x 10 watts each = 50 watts therefore a 60 watt (60VA) transformer would be acceptable, however if you had 6 lamps a 60 watt transformer would be "maxed" out. In this case we would then recommend a 105 watt (105VA) model.
The original type of ballast, the electromagnetic ballast was introduced with the first iteration of fluorescent lamps.