12 Volt Halogen Dichroic MR16 (36 Degree Beam) Closed Front 25 Watt

Product Discontinued
This item was discontinued on 30th September, 2021
View our recommended replacement product below:
Alternatively check out our full range of simular products below:
Halogen MR16 Light Bulbs (50mm Diameter)
Beam Angle
36 Degrees
Cap/Base
GX5.3/GU5.3
Cap/Base Type
2 Pin
Colour Temp
2700 K
Diameter
50 mm
Dimming?
Dimmable
Glass Fronted?
Closed Front
Length
45 mm
Light Bulb Type
Reflectors/Spotlights
Light Colour
Warm White (830)
Lumens
250 lm
Manufacturer
Kosnic
Reflector/Spotlight Type
MR16
Technology
Halogen
Type
Light Bulb
Voltage
12 Volt
Wattage
25 W
12 Volt Halogen Dichroic MR16 (36 Degree Beam) Closed Front 25 Watt from Kosnic
Model: KHS25MR16G5.3ALU830
This Halogen Dichroic 25 Watt 12 Volt 36 degree MR16 spotlight is a perfect alternative to a traditional incandescent light due to its improved efficacy and longer 2000 hour lamp life. This bulb has a Closed Front meaning it can be used in open light fittings thus increasing its applications compared to an open fronted lamp.
Technical Specifications
Light Bulb Type | Reflectors/Spotlights |
---|---|
Technology | Halogen |
Wattage | 25 W |
Manufacturer | Kosnic |
Light Colour | Warm White (830) |
Dimming? | Dimmable |
Beam Angle | 36 Degrees |
Lumens | 250 lm |
Colour Temp | 2700 K |
Diameter | 50 mm |
Length | 45 mm |
Cap/Base Type | 2 Pin |
Type | Light Bulb |
Manufacturers Average Lamp Life | 2000 hrs |
Voltage | 12 Volt |
Glass Fronted? | Closed Front |
Warranty | 1 Year |
Reflector/Spotlight Type | MR16 |
Cap/Base | GX5.3/GU5.3 |
Alternative Stock Identifier Part Codes
KH525MR16/G5.3-ALU |
Components
For 12 Volt Halogen Dichroic MR16 (36 Degree Beam) Closed Front 25 Watt
Downloads
Frequently Asked Questions
We make every effort in answering your questions.
Can I swap my Halogen MR16 light bulbs for LED versions?
Thu Jul 2015
Simple answer, yes. However it will take a bit of research. MR16s run on low voltage which means they require a transformer. Most transformers installed to work with halogens have a minimum wattage of 25 watts. The LED equivalents are general ...
What Lumens do I need to replace a Halogen MR16?
Thu Jul 2015
Lumens is a universal scale for brightness of the light bulbs. The higher the Lumen number the brighter the light. In the past wattage has been the way of measuring light output for incandecent and halogen bulbs, so as long as you replaced yo ...
What's the difference between a GU10 and MR16?
Fri Jul 2015
There are a few differences between them, firstly they have different cap/base types. The GU10 has a twist and lock mechanism while MR16s push straight in. Another difference is the voltage that they run on. GU10s run on 240v which is exactly the ...