Loading basket...
All LED 75mm Cutout IP20 iCan75 LED Fire Rated Downlight (Black)
Quick Find: 68560
Part No: AFD75
In Stock
Available for delivery
Available for delivery
Price
£8.53
Inc. VAT
£10.24
£19.97 RRP Inc. VAT
49% off saving (£9.73) on RRP Price
£8.53
Inc. VAT £10.24
Inc. VAT £10.24
£19.97 RRP Inc. VAT
49% off saving (£9.73) on RRP Price
Quick Find: 68560
Part No: AFD75
Diameter
91.5 mm
Dimming?
Non-Dimmable
Downlight Cut Out
75 mm
Downlight Fixing Type
Springs
Finish
Aluminium
Fire Rated?
Yes
Height
122 mm
Light Fitting Type
Downlight
Manufacturer
All LED
Technology
LED/Halogen
Type
Light Fitting
Wattage
10 W
Product Overview
All LED 75mm Cutout IP20 iCan75 LED Fire Rated Downlight (Black) from All LED
Model: AFD75
The All LED 75mm Cutout IP20 iCan75 LED Fire Rated Downlight (Black) (Part Number: AFD75) is a premium lighting solution designed by ALL LED. This stylish and reliable downlight offers a sleek black finish, enhancing the aesthetic of modern interiors. Engineered for safety and efficiency, it features a 75mm cutout and an IP20 rating, making it ideal for indoor applications in both residential and commercial spaces.
Product Features:
- Fire Rated: Certified for 30, 60, and 90 minutes on timber joists.
- i-Joist Compatibility: 30 minutes fire-rated for Staircraft i-Joists.
- Metal Web Joist: 30 minutes fire-rated for Wolf System metal web joists.
- Regulation Compliance: Compliant with Part B (Fire), Part C (Moisture), Part E (Acoustic), and Part L (Air Leakage) building regulations.
- Quick Installation: Equipped with loop-in, loop-out quick-connect push terminals for hassle-free wiring.
- Improved Lamp Life: Open vent design enhances airflow, prolonging the life of the LED lamp.
- Ultra Slim Design: Low-profile construction with an ultra-slim twist & lock bezel for easy installation and a clean finish.
This fire-rated downlight combines cutting-edge features and safety compliance, making it a dependable choice for any lighting project.
Please note that this product does not come with a bezel or a bulb.
Technical Specifications
| Light Fitting Type | Downlight |
|---|---|
| Technology | LED/Halogen |
| Wattage | 10 W |
| Manufacturer | All LED |
| Dimming? | Non-Dimmable |
| Diameter | 91.5 mm |
| Height | 122 mm |
| Max Wattage | 50 W |
| Type | Light Fitting |
| Finish | Aluminium |
| IP Rating | IP20 |
| Fire Rated? | Yes |
| Downlight Fixing Type | Springs |
| Warranty | 3 Years |
| Downlight Cut Out | 75 mm |
| Lamp Type Required | GU10 |
Associated Product Barcodes
| 5060393746706 |
Alternative Stock Identifier Part Codes
| AFD75 |
Downloads 2
Related Module 1
-1-150x150.png "10 Pack All LED Dimmable GU10 4.7W Warm White 50W Alternative")
Related Plaster-In Kit 2
Related Converter Plates 2
Related Multiples 1
Maggie Parker
18th July 2026
Neil Sangster
5th July 2026
The surface mounted LED light fittings are very good, only criticism is the way they fix / hang from the ceiling! The 3 clips that mount on the ceiling are very fragile (bend very easily) and unless the ceiling is perfectly straight and level, the light fitting falls to the ground as they fail to hold it sufficiently. Also, if fitting is on a ceiling (underside of a timber floor), any movement above shakes the fittings loose and, again they fall from the ceiling! I had to improvise and use tie wraps / make metal strip brackets to hold each end of the fittings tight to the ceiling to prevent them falling to the ground. This does spoil the looks a bit, but as these lights are in my garage / workshop, it does not really matter. If I were fitting these strip lights for a customer, it would be a different story / matter, I would look for something with a physical fixing through the fitting, I cannot understand why the fittings do not have removable end caps, which underneath have holes for screw fixings to be used!
