Danlers BMINTPIRSP Batten Mounted PIR Occupancy Switch (1m Lead Wire)
Quick Find: 34969
Product Discontinued
This item was discontinued on 24th November, 2025
Alternatively check out our full range of simular products below:
Danlers
Accessory Type
Sensor
Amps
6 A
Detection Angle
20 Degrees
Detection Range
1.5m
Fluorescent Max Load
6A (1500W)
Height
36 mm
Length
120 mm
Manufacturer
Danlers
Sensor Type
Batten Mounted PIR Sensor
Timer Delay
10sec - 40min
Type
Accessory
Voltage
220-240 Volt
Width
50 mm
Product Overview
Danlers BMINTPIRSP Batten Mounted PIR Occupancy Switch (1m Lead Wire) from Danlers
Model: BMINTPIRSP
A super Spot Detection Range PIR Occupancy Switch for simple installation onto the end of lighting battens. Reducing energy consumption by switching on the load only when there is insufficient ambient light and a presence is detected. The light level can be pre-set manually.
Technical Specifications
| Accessory Type | Sensor |
|---|---|
| Manufacturer | Danlers |
| Amps | 6 A |
| Height | 36 mm |
| Lead Wire | 1 Meter |
| Length | 120 mm |
| Type | Accessory |
| Fluorescent Max Load | 6A (1500W) |
| Detection Range | 1.5m |
| Voltage | 220-240 Volt |
| IP Rating | IP53 |
| Detection Angle | 20 Degrees |
| Width | 50 mm |
| Sensor Type | Batten Mounted PIR Sensor |
| Timer Delay | 10sec - 40min |
| Resistive Load | 10A (2500W) |
| Photocell Range | 30-1000 Lux |
| Electronic & Wire Wound Transformer Load | 3A (750W) |
| CFL Max Load | 2A (500W) |