Danlers BMPIRRH Batten Mounted PIR Occupancy Switch (1m Lead Wire)
Quick Find: 34972
Product Discontinued
This item was discontinued on 2nd November, 2022
Check out our full range:
Danlers
Accessory Type
Sensor
Amps
6 A
Detection Angle
100 Degrees
Detection Range
2.5m
Fluorescent Max Load
6A (1500W)
Height
36 mm
Length
120 mm
Manufacturer
Danlers
Sensor Type
Batten Mounted PIR Sensor
Timer Delay
10sec - 40min
Type
Accessory
Voltage
220-240 Volt
Width
50 mm
Danlers BMPIRRH Batten Mounted PIR Occupancy Switch (1m Lead Wire) from Danlers
Model: BMPIRRH
An Active Mounted PIR Occupancy Switch for Batten Mounting that provides instant light upon detection of movement. This reduced height version is an energy saving occupancy sensor that is not only reliable but cost effective and reassuring, offering illumination when needed most.
Technical Specifications
| Accessory Type | Sensor |
|---|---|
| Manufacturer | Danlers |
| Amps | 6 A |
| Height | 36 mm |
| Lead Wire | 1 Meter |
| Length | 120 mm |
| Type | Accessory |
| Fluorescent Max Load | 6A (1500W) |
| Detection Range | 2.5m |
| Voltage | 220-240 Volt |
| IP Rating | IP53 |
| Detection Angle | 100 Degrees |
| Width | 50 mm |
| Sensor Type | Batten Mounted PIR Sensor |
| Timer Delay | 10sec - 40min |
| Resistive Load | 10A (2500W) |
| Photocell Range | 30-1000 Lux |
| Electronic & Wire Wound Transformer Load | 3A (750W) |
| CFL Max Load | 2A (500W) |
Alternative Stock Identifier Part Codes
Components
For Danlers BMPIRRH Batten Mounted PIR Occupancy Switch (1m Lead Wire)
Downloads
| Product Datasheet |
Frequently Asked Questions
We make every effort in answering your questions.
Glossary
