Loading basket...
Danlers CEFL PIR 24V Occupancy Switch (2m Lead Wire) DC
Quick Find: 34954
Product Discontinued
This item was discontinued on 24th November, 2025
Accessory Type
Sensor
Amps
6 A
Detection Angle
360 Degrees
Detection Range
7m
Diameter
72 mm
Fluorescent Max Load
6A (1500W)
Height
68 mm
Manufacturer
Danlers
Sensor Type
Flush Ceiling Mounted PIR Sensor
Timer Delay
10sec - 40min
Type
Accessory
Voltage
24 Volt
Product Overview
Danlers CEFL PIR 24V Occupancy Switch (2m Lead Wire) DC from Danlers
Model: CEFL-PIR-24VDC
A feature packed 24V PIR Occupancy Switch from Danlers ideal for installation in flush mounted suspended and plasterboard ceilings. It benefits from a 360 degree detection zone switching on automatically when movement is sensed and off after a chosen period of time (between 10 seconds and 40 minutes). Ideally suited to office, factories, and school and workshop applications it emits a White (835) colour temperature and comes complete with a 2m lead wire.
Technical Specifications
| Accessory Type | Sensor |
|---|---|
| Manufacturer | Danlers |
| Amps | 6 A |
| Diameter | 72 mm |
| Height | 68 mm |
| Lead Wire | 2 Meter |
| Type | Accessory |
| Fluorescent Max Load | 6A (1500W) |
| Detection Range | 7m |
| Voltage | 24 Volt |
| IP Rating | IP20 |
| Detection Angle | 360 Degrees |
| Sensor Type | Flush Ceiling Mounted PIR Sensor |
| Timer Delay | 10sec - 40min |
| Photocell Range | 30-1000 Lux |
| Electronic & Wire Wound Transformer Load | 3A (750W) |
| CFL Max Load | 2A (500W) |
| Fan Max Load | 1A (240W) |
Alternative Stock Identifier Part Codes
| CEFL-PIR-24VDC |
Downloads 1
Customers Who Bought This Also Bought
Lawrence Gibbons
12th December 2025
These guys deserve a review just because of how expertly packaged they sent my fragile and delicate T5 tubes. I will admit not having high hopes of a courier being able to deliver these in one piece but they were snugly bubble wrapped in a very sturdy cardboard tube. Fantastic fast delivery.
Isabel Davies
3rd December 2025
BLT suggested an alternative light bulb for one that had been discontinued which meant I didn't have to replace the fitting, very helpful, thanks
