Kosnic LED MR16 4.5 Watt Daylight (20 Watt Alternative)
Kosnic LED MR16 4.5 Watt Daylight (20 Watt Alternative)from Kosnic (Model: KTC4.5PWR/G5.3-S65)
4.5 Watt LED Daylight MR16. Offering exceptional levels of brightness this low cost lamp consists of 3 High Powered LEDs which are protected by a frosted (diffused) cover.
Producing the same light output as a 20W halogen MR16 this bulb features a 36 degree beam angle and is the ideal replacement for a halogen MR16.
Plugging straight into your existing fitting no LED driver/transformer is required.
These LED lamps can be used with halogen transformers with a minimum load of 20W or less. Multiple lamps may be required to work with a halogen transformer with a minimum load of 35W or higher.
Potential saving for bulb over its manufacturers predicted life: £55.80
Assuming electricity is charged at p per kWh rate (most electricity companies charge approx. 12p per kWh).
Product Downloadsavailable for this item
| Product Data Sheet|
LED MR16 4.5 Watt Daylight (260 Lumens - 42W Alternative)
Frequently Asked Questions
We make every effort in answering your questions. Below is a list of those questions we are frequently asked. Please consult these before contacting us. Click on a question below to reveal its answer.
Lumens (Lm) are a new unit of comparison for types of light bulbs and other lighting products. The Lumen is going to be used in the lighting industry to describe lighting products with increasing frequency as the Watt slips out of use. Manufacturers ...Read More »
The benefit of using LEDs to light your home, office or business is that LEDs will be able to provide you with a great level of efficiency. Compared to traditional Incandescent and halogen light bulbs, LED lighting is several times more efficient. A ...Read More »
LED Light Bulbs will be able to offer you some truly amazing energy savings. An LED Light Bulb will be able to offer you a much greater level of efficiency than Halogen or Incandescent bulbs and also beats fluorescent lighting in this aspect. As such ...Read More »
Simple answer, yes. However it will take a bit of research. MR16s run on low voltage which means they require a transformer. Most transformers installed to work with halogens have a minimum wattage of 25 watts. The LED equivalents are general ...Read More »
Lumens is a universal scale for brightness of the light bulbs. The higher the Lumen number the brighter the light. In the past wattage has been the way of measuring light output for incandecent and halogen bulbs, so as long as you replaced yo ...Read More »
There are a few differences between them, firstly they have different cap/base types. The GU10 has a twist and lock mechanism while MR16s push straight in. Another difference is the voltage that they run on. GU10s run on 240v which is exactly the ...Read More »
Customers Who Bought This Also Bought
Part Number: KPRO06PWR/GU10-S65
£4.55 inc. VAT
Part Number: 0027126
£7.22 inc. VAT
Part Number: CDM-T35-942
£16.19 inc. VAT