PLC 4 Pin Compact Fluorescent Lamp 10 watt Warm White 830
£5.00
£4.84
£5.81
Save a total of £0.16
Part No: PLC10w4P830
Product Summary
G24Q-1
4 Pin
3000 K
> 80
35 mm
Non-Dimmable
110 mm
Multi Tube
Warm White (830)
600 lm
Leading Brand
Compact Fluorescent
Light Bulb
220-240 Volt
10 W
PLC 4 Pin Compact Fluorescent Lamp 10 watt Warm White 830
from Leading Brand (Model: PLC10w4P830)| Cap/Base | G24Q-1 |
| Cap/Base Type | 4 Pin |
| Colour Temp | 3000 K |
| CRI Rating | > 80 |
| Diameter | 35 mm |
| Dimming? | Non-Dimmable |
| Length | 110 mm |
| Light Bulb Type | Multi Tube |
| Light Colour | Warm White (830) |
| Lumens | 600 lm |
| Manufacturer | Leading Brand |
| Manufacturers Average Lamp Life | 8000 hrs |
| Technology | Compact Fluorescent |
| Type | Light Bulb |
| Voltage | 220-240 Volt |
| Warranty | 2 Years |
| Wattage | 10 W |
Product Barcodes
associated with this item| 8711500623294 |
Part Codes
of alternative stock identifiers| 0025920 |
| FDE10830 D111 |
| PLC 10 WATT 4 PIN 830 |
| PLC10W 4PIN 830 Phlips |
Additional Information
for product items in generalFrequently Asked Questions
We make every effort in answering your questions. Below is a list of those questions we are frequently asked. Please consult these before contacting us. Click on a question below to reveal its answer.
Can I swap my compact fluorescent bulb for a higher/lower wattage?
Fri Jul 2015Unfortunately not, because all CFL lamps needs to be matched to a specific fitting. You could however change the colour temperature to a cooler colour which will result in a higher lumen output. For example if you change from 2700k to 6000k you ...
Read More »Can I swap one brand of tube for another?
Fri Jul 2015Yes, as long as they're the same wattage. We offer fluorescent tubes from all the large manufacturers including Osram, Philips, Sylvania and GE. Different manufacturers use different product names to describe a fluorescent tubes, see bel ...
Read More »What's the difference between switch start and high frequency?!
Tue Jul 2015Switch Start Switch start is the control gear that has been used by the industry for many years. The current is limited by a wire wound magnetic choke or ballast. The choke, which is a coil of wire makes the circuit inductive. The advantage of switc ...
Read More »
