Loading basket...
Tridonic Compact LED Driver LCO 14W 100-550mA 38V pD+ NFC C PRE3
Quick Find: 78079
Part No: 28004660
In Stock
Available for delivery
Available for delivery
Price
£54.52
Inc. VAT
£65.42
£104.68 RRP Inc. VAT
38% off saving (£39.26) on RRP Price
£54.52
Inc. VAT £65.42
Inc. VAT £65.42
£104.68 RRP Inc. VAT
38% off saving (£39.26) on RRP Price
Quick Find: 78079
Part No: 28004660
Accessory Type
LED Driver
Control Gear Technology
LED
Control Gear Type
LED Driver
Current Output
100-550mA
Dimming?
Dimmable
Height
31 mm
Input Voltage
198-264
Length
123 mm
Manufacturer
Tridonic
Output Voltage (LED Driver)
60 V
Type
Control Gear
Voltage
60 Volt
Wattage
14 W
Width
90 mm
Product Overview
Tridonic Compact LED Driver LCO 14W 100-550mA 38V pD+ NFC C PRE3 from Tridonic
Model: 28004660
The Tridonic Compact LED Driver LCO 14W is designed to deliver a constant current of 100-550mA with an output voltage of 38V. It features pD+ NFC technology and is compatible with the PRE3 interface. This driver is an efficient and reliable solution for powering LED lighting applications.
Technical Specifications
| Control Gear Type | LED Driver |
|---|---|
| Accessory Type | LED Driver |
| Wattage | 14 W |
| Manufacturer | Tridonic |
| Dimming? | Dimmable |
| Height | 31 mm |
| Input Voltage | 198-264 |
| Length | 123 mm |
| Type | Control Gear |
| Manufacturers Average Lamp Life | 100000 hrs |
| Voltage | 60 Volt |
| IP Rating | IP20 |
| Current Output | 100-550mA |
| Warranty | 8 Years |
| Width | 90 mm |
| Rated Supply Voltage | 220-240 |
| Mains Frequency | 0 / 50 / 60 Hz |
| Efficiency at Full Load | 85.40% |
| Housing Style | Compact |
| Operating Mode (Constant Current / Constant Voltage) | Constant Current |
| Max Input Power | 22W |
| Inrush Current | 7.6 A / 470 µs |
| Output Voltage (LED Driver) | 60 V |
| Control Gear Technology | LED |
Alternative Stock Identifier Part Codes
Downloads 1
Maggie Parker
18th July 2026
Neil Sangster
5th July 2026
The surface mounted LED light fittings are very good, only criticism is the way they fix / hang from the ceiling! The 3 clips that mount on the ceiling are very fragile (bend very easily) and unless the ceiling is perfectly straight and level, the light fitting falls to the ground as they fail to hold it sufficiently. Also, if fitting is on a ceiling (underside of a timber floor), any movement above shakes the fittings loose and, again they fall from the ceiling! I had to improvise and use tie wraps / make metal strip brackets to hold each end of the fittings tight to the ceiling to prevent them falling to the ground. This does spoil the looks a bit, but as these lights are in my garage / workshop, it does not really matter. If I were fitting these strip lights for a customer, it would be a different story / matter, I would look for something with a physical fixing through the fitting, I cannot understand why the fittings do not have removable end caps, which underneath have holes for screw fixings to be used!
