Loading basket...
Tridonic Compact LED Driver LCO 90W 200-1050mA 165V pD+ NFC C PRE3
Quick Find: 78092
Part No: 87500832
In Stock
Available for delivery
Available for delivery
Price
£71.67
Inc. VAT
£86.00
£137.59 RRP Inc. VAT
37% off saving (£51.59) on RRP Price
£71.67
Inc. VAT £86.00
Inc. VAT £86.00
£137.59 RRP Inc. VAT
37% off saving (£51.59) on RRP Price
Quick Find: 78092
Part No: 87500832
Accessory Type
LED Driver
Control Gear Technology
LED
Control Gear Type
LED Driver
Current Output
200-1050mA
Dimming?
Dimmable
Height
37.5 mm
Input Voltage
198-264
Length
150 mm
Manufacturer
Tridonic
Type
Control Gear
Voltage
220-240 Volt
Wattage
90 W
Width
90 mm
Product Overview
Tridonic Compact LED Driver LCO 90W 200-1050mA 165V pD+ NFC C PRE3 from Tridonic
Model: 87500832
Introducing the Tridonic Compact LED Driver LCO 90W, designed to deliver high performance and reliability. With a current range of 200-1050mA and a voltage range of 165V, this driver offers versatile functionality. Equipped with NFC technology and a pD+ interface, it ensures seamless connectivity and control. The PRE3 technology further enhances its efficiency and precision. Trust Tridonic 87500832 for superior LED driver solutions.
Technical Specifications
| Control Gear Type | LED Driver |
|---|---|
| Accessory Type | LED Driver |
| Wattage | 90 W |
| Manufacturer | Tridonic |
| Dimming? | Dimmable |
| Height | 37.5 mm |
| Input Voltage | 198-264 |
| Length | 150 mm |
| Type | Control Gear |
| Manufacturers Average Lamp Life | 100000 hrs |
| Voltage | 220-240 Volt |
| IP Rating | IP20 |
| Current Output | 200-1050mA |
| Warranty | 8 Years |
| Width | 90 mm |
| Rated Supply Voltage | 220-240 |
| Mains Frequency | 0 / 50 / 60 Hz |
| Efficiency at Full Load | 92.00% |
| Housing Style | Compact |
| Operating Mode (Constant Current / Constant Voltage) | Constant Current |
| Max Input Power | 100W |
| Inrush Current | 38 A / 280 µs |
| Control Gear Technology | LED |
Alternative Stock Identifier Part Codes
Downloads 1
Maggie Parker
18th July 2026
Neil Sangster
5th July 2026
The surface mounted LED light fittings are very good, only criticism is the way they fix / hang from the ceiling! The 3 clips that mount on the ceiling are very fragile (bend very easily) and unless the ceiling is perfectly straight and level, the light fitting falls to the ground as they fail to hold it sufficiently. Also, if fitting is on a ceiling (underside of a timber floor), any movement above shakes the fittings loose and, again they fall from the ceiling! I had to improvise and use tie wraps / make metal strip brackets to hold each end of the fittings tight to the ceiling to prevent them falling to the ground. This does spoil the looks a bit, but as these lights are in my garage / workshop, it does not really matter. If I were fitting these strip lights for a customer, it would be a different story / matter, I would look for something with a physical fixing through the fitting, I cannot understand why the fittings do not have removable end caps, which underneath have holes for screw fixings to be used!
